浏览次数:6
选件 | 是否计量 | 发货周期 | 保修时间 | 成色 |
---|---|---|---|---|
否 | 3天 | 90天 | 8成新 | |
所在地 | 机身号 | 状态 | 资料下载 | |
- | 完好 |
是德科技N4694A兆瓦电子校准(ECal)模块使矢量网络分析仪的校准变得快速,轻松和准确。现在,根据网络分析仪,可以通过两种方法之一轻松控制RF ECal系统。Keysight PNA和ENA系列网络分析仪直接通过USB接口控制模块。
ECal是校准网络分析仪的理想解决方案。使用ECal与机械校准套件进行完整的两端口校准所需的时间和连接次数少于一半。此外,校准的准确性在电子和机械方法之间是可比的。传统的机械校准要求操作员进行大量互动,这容易出错。使用ECal,操作员只需将ECal模块连接到网络分析仪,然后由软件控制其余部分。
特点:
10 MHz至67 GHz频率范围
USB接口,可通过PNA和ENA系列网络分析仪直接控制
快速校准
单一连接即可进行完整的两端口校准
减少连接器磨损
NIST可追溯的准确校准
可靠的固态开关
The Keysight N4694A MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Keysight PNA and ENA series of network analyzers controls the module directly via the USB interface.
ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
10 MHz to 67 GHz frequency range
USB interface for direct control with PNA and ENA series of network analyzers
Fast calibration
Full two-port calibration with a single connection
Reduced connector wear
NIST traceable accurate calibrations
Reliable solid-state switching
Copyright © 2007 All Rights Reserved. 深圳市晧辰电子科技有限公司 版权所有 [粤ICP备14101712号-1] [法律顾问]
公司地址:广东省深圳市南山区西丽街道官龙村华纵科技楼5楼 邮编:518055
在线QQ服务: 服务热线:0755-86016691 电话:13715327187 传真:0755-86641139-816
E-mail:info@wl95.com