Product Description:
Each 3310F series module has its own control and display panel in CC/CR/CV/CP/Dynamic mode, and plugs into the 3300F with 150 sets of Store/Recall memory to provide load Settings more efficiently. It can also be used for intranting control, Ethernet, USB and GPIB interfaces via RS232.
SHORT time setting and SHORT_VH, SHORT_VL setting function, can also measure the short circuit voltage and current.
Dynamics can be simulated in CC and CP modes. The current rise/fall swing rate can be adjusted separately, and there is an external signal input, so that the load can have an analog arbitrary waveform.
Programmable load on/off voltage, GO/NG meter check, voltmeter display "+" or "-" to choose from, 150 groups of storage/call larger memory are very advanced features for each different application.
150 groups of test parameters and state storage function, according to automatic sorting requirements to call the storage memory in real time.
Product Features:
⊙ Must be installed on the chassis 3302F [single frame], 3305F [double frame] or 3300 F [four frame], and the chassis has 150 sets of storage/call memory.
⊙ 5-digit digital voltage, current and power meter.
⊙ High speed measurement and communication transmission rate.
Can display voltage value, current value, watt value at the same time.
⊙ Large LCD Display, can be used to adjust the setting value of the shuttle knob or key.
⊙ Can perform OCP and OPP tests.
⊙ Can set the value of boot state.
⊙ Constant current, constant resistance, constant voltage, constant power, dynamic and short circuit mode