Product Overview
The Keithley 2602 SourceMeter lets you make precision DC, pulse, and low frequency AC source-measure tests faster, easier, and more economically than ever before. The Keithley 2602 offers two to four times the test speed of competitive products for I-V functional testing by combining:
-
Keithley’s high speed, third-generation Source-Measure Unit (SMU) design
-
An embedded Test Script Processor (TSP™)
-
TSP-Link™, a fast triggering and inter-unit communication bus
The Keithley 2602 packs twice the source-measure channel density of the Model 2601 in the same size enclosure, so you can configure multi-channel systems in very little rack space. Each 40W, 3A channel is electrically isolated to ensure high measurement integrity and wiring flexibility. The Keithley 2602 packs many instruments into a small package, including:
-
A precision power supply
-
A true current source
-
A 51/2-digit multimeter
-
A voltage or current pulse generator with measurement
-
A low frequency arbitrary waveform generator
-
An electronic load
-
A trigger controller
Features and Specifications of the Keithley 2602 include:
-
TSP-Link allows connection of multiple 2600 series instruments in a master/slave config allowing unlimited scalability
-
On-board Test Script Processor processes and runs complex sequences from the instrument - gives you up to 10X greater throughput
-
allows creation of custom measurement functions for components such as varistors, diodes and BJTs/FETs, or algorithm based tests like I-V sweeps with power compliance, linearity and latch-up test sequences, and thermal response tests.
-
Store up to 50,000 lines of TSP code and more than 200,000 readings in 16MB of nonvolatile memory.
-
Measure I and V simultaneously on each channel at >10,000 readings/s. Execute a full source-measure cycle on any channel in just 200µs
-
Ensure repeatable timing and high throughput with the high speed auto-ranging function.
-
GPIB, RS-232 and 14-bit digital I/O interface ports are standard
-
Current measure range (per channel) 1pA to 3A
-
Current source range (per channel) 5pA to 3A
-
Basic current programming accuracy 0.03%
-
Basic current measurement accuracy 0.02%
-
Voltage measure range (per channel) 1µV to 40V
-
Voltage source range (per channel) 5µV to 40V
-
Basic voltage programming accuracy 0.02%
-
Basic voltage measurement accuracy 0.015%
-
Readings to memory 10,000/s
-
Sweep source change and reading to memory 5,500/s
-
Sweep source change and reading to GPIB 3,600/s
-
Spot readings to GPIB 1,100/s
-
Spot source change and reading to GPIB 880/s
-
Pulse capability 200µs minimum source/measure pulse