Product Description:
The MP2110A is an integrated measuring instrument with a built-in bit error rate tester (BERT) and sampling oscilloscope, supporting evaluation operations such as bit error rate (BER) measurement and eye map analysis in optical modules.
With the integrated BERTWave MP2110A with a built-in 4-channel BERT and dual-channel sampling oscilloscope, there is no need to use a separate instrument, thereby reducing instrument capital investment and production costs. Moreover, the BERTWave MP2110A not only measures the bit error rate (BER) of up to 4 channels simultaneously on the RX side of the optical module, but also performs eye pattern template testing and eye pattern analysis for up to 4 channels simultaneously on the Tx side. In addition, the MP2110A sampling oscilloscope has a sampling rate of up to 250,000 samples per second (six times faster than the previous generation of instruments), enabling faster eye pattern template testing and eye pattern analysis. Support NRZ signal mask edge measurement and jitter analysis. PAM4 signals can also be analyzed and TDECQ measurements up to 53 Gbaud are supported. With the BERTWave MP2110A, BER measurements and eye map analysis can be performed simultaneously, reducing the measurement time by 65%.
The MP2110A BERT measures bitrates from 24.3Gb/s to 28.2 Gb/s in standard configuration, and 9.5Gb/s to 14.2 Gb/s with Opt-093 installed. The built-in sampling oscilloscope supports bandwidths of 40 GHz (electrical I/F), 35GHz (SMF, optical I/F), and 25 GHz (MMF, optical I/F). In addition, the sampling oscilloscope also comes standard with a built-in Bessel filter in the 100 Gb/s band for measuring optical signals. Excellent performance helps to ensure increased output of optical modules.
Features:
-
All-in-one BERT and sampling oscilloscope
-
Custom built-in 4ch sampling oscilloscope and 4ch BERT update
-
Fast measurement and high performance shorten test times, improve yields and reduce infrastructure costs
-
Sampling oscilloscope
-
Fast: 250 ksamples/s, 1 Msamples can be measured in about 5 s
-
High sensitivity: -
-
15 dBm (typical, SMF)