Product Description:
Using DDS (Digital Direct synthesis), it can produce high intensity, high resolution and wide band signal. Output signals of 0.01μHz ~ 15MHz and 0.01μHz ~ 50MHz.
The set resolution is 0.01μHz and the frequency range is ±5ppm in the whole frequency band by the full synthesis method.
In addition, the WF 1944 covered a high frequency region of 100MHz. In CH2 (HF mode), PLL (phase-locked loop) mode, sine wave continuous oscillation.
Features:
5 standard waveforms + arbitrary waveforms
-
It can output sine waves, square waves (duty cycle 50%), square waves (duty cycle variable), triangular waves, sawtooth waves, inverse sawtooth waves, waveform including noise, and arbitrary waveforms. Any waveform can be operated by the control board/produced via GPIB, USB interface, can store 12 waveforms. In addition, if you use any waveform creation software 0105 Japanese/English version (sold separately), you can simply create and transmit complex waveforms on a personal computer.
Scanning function and modulation function
-
The various parameters of frequency, phase, amplitude, bias and duty cycle can be scanned by combining continuous/single transmission/strobe scan/linear/logarithm (logarithm is limited to frequency and amplitude). In addition, it can also perform AM, FM(FSK), phase (PSK), PWM, and bias modulation. WF 1943A/WF 1944A in FM(FSK), phase (PSK).
Burst/trigger/gate/trigger gate
-
Can freely control the start and stop of oscillation.
-
With the stop level function, the level at which the oscillation stops can be arbitrarily set.
-
The number of burst stopping waves can be independently set up to 500000.0 waves in 0.5 waves.
Square wave output setting is convenient
-
The duty cycle of the square wave is 0% ~ 99.9900 variable. (Set to 0.0001% resolution)
-
In addition, WF 1965/WF 1966 can set the rise/fall time of the square wave. (7ns ~ 1ms)
-
The duty cycle of WF 1956 is variable from 0.001 to 99.9900%.
2 channel action (WF 1944A/WF 1946A/WF 1966/WF 1956)
-
Can output 2 channels independent /2 phase (variable phase)/frequency ratio certain/frequency difference certain/difference (for the same frequency, amplitude · bias for the opposite waveform).
Use keyboard prompts for reliable, smooth operation
-
To make keyboard operations easy to understand, WAVE FACTORY uses keyboard prompts on the dashboard surface. Only the keys that can be operated in the next step will be lit in turn, thus displaying necessary and sufficient information at any time.
Other properties:
-
Set memory
-
Scan assist input/output
-
Output suspension
-
External AM
-
External addition operation
-
Interface: GPIB (all models), USB (except WF 1956)
-
Arbitrary waveform making software 0105 (Japanese version/English version, sold separately)
-
Synchronous operation (factory add-on performance)
-
Digital output (factory add-on performance)
-
Except for WF 1943A/WF 1944A.